DynaGen TG600 PRO600 Generator and Engine Controller
DynaGen TG600 PRO600 Generator and Engine Controller - Back
DynaGen TG600 PRO600 Generator and Engine Controller - Side View
35 Position AMP Connector for DynaGen PRO600 and TG600
Crimp connectors for DynaGen PRO600 and TG600 AMP Connector
Dynagen ES52 Autostart Engine Controller Dynagen ES52 Autostart Engine Controller $305.79
DynaGen 200 Engine Controller Front View DynaGen 200 Engine Controller From $462.20

Dynagen TG600 Generator Controller

$615.70

The DynaGen™ PRO600 provides engine and generator control for autostart or manual operations on mechanically or electronically governed engines.

The TE600 and TG600 engine and generator controllers offer CANbus and Modbus communication and 32 inputs. Each controller is ideal for use in extremely harsh environmental conditions.

Add to Cart
DynaGen TG600 PRO600 Generator and Engine Controller
Dynagen TG600 Generator Controller
$615.70
Currency Switcher

Rating: 4.5 out of 5.
Shipping to USA and Canada
  • Insurance Included

DynaGen Pro600

    The DynaGen PRO600 provides engine and generator control for autostart or manual operations on mechanically or electronically governed engines. The TE600 and TG600 engine and generator controllers offer CANbus and Modbus communication and 32 inputs. Each controller is ideal for use in extremely harsh environmental conditions.

Features

    Rugged Housing

      Conformally coated for protection against moisture and contaminants. Front panel gasket for panel water ingress protection meets IP67 standards.

    Display

      Sunlight readable, oil pressure, engine temperature, fuel and oil levels, hour meter, RPM, battery voltage, real-time clock with date/time, J1939 DTC codes, DPF and DEF status icons, and J1939 percent load and percent torque.

    Autostart

      Manual and remote start and autostart trigger on sensor value (pressure, temperature, level, voltage)

    Speed Control

      Front panel RPM adjustment buttons, full electronic variable speed control over J1939, configurable remote bump speed control, configurable ramping control with 3 set points: idle, intermediate and goal RPM, and adjustable min/max RPM limits.

    Functions

      Built-in weekly scheduler, maintenance counter, Configurable Diagnostic Trouble Code (DTC), manual and automatic modes, a full selection of timers and long-run function, and configurable or replaceable buttons with custom text

    Closed Loop Control

      Closed loop control using feedback from sensors such as level and pressure

    Switch Inputs

      12 configurable switched inputs

    Modbus Communication

      Supports standard Modbus RS485 communication

    Warranty

      Five-year warranty or 17,500 hours

    ISO Certification

      Manufactured in an ISO 9001:2015 certified operation

Additional information

Weight 0.6 kg
Dimensions 24 × 16.5 × 6.5 cm

Specifications

Pro600

DynaGen Pro600 Specifications
Battery
Range5.5-38 VDC
Cranked Dropout to 0VDC50ms
Reverse BatteryYes
Standby Current45 mA
Display
Resolution480x272 (WQVGA)
Diagonal4.3"
TypeTFT
Storage Temperature-40°C to 85°C
Operating Temperature w/o heater-30°C to 85°C
Outdoor ReadableYes
Brightness1000 nit
Contract Ratio600:01:00
Button
Number6+5 soft buttons
Relegendable Key CapsYes
Mechanical
Dimensions7.44" x 4.9"
Cutout Size6.44" x 4.04"
Sealed EnclosureMeets IP67 requirments
Sealed to panelMeets IP67 requirments
Connectors2 x 35 pin AMPSEAL
Communications
Canbus J19391
Modbus RS4851
Software Configurable Yes
Internal Resistor120 Ohms
Inputs
Switched Inputs12
Software ConifgurableYes
Minimum Trigger Delay<100ms
Decision Threshold3 VDC
Analog Inputs10
Software ConfigurableYes
Separate Battery and PCB Temp MeasurmentYes
Accuracy+/- 2%
Frequency Inputs1
Range10-10,000 Hz at 1~50 VAC
Internal Sensors
Battery VoltageYes
Internal TemperatureYes
AC Voltage
Number3 Phase
Max Voltage6 V RMS
Accuracy1% full scale (600 V)
ConfigurationSingle Phase 2 & 3 Wire
Delta 3&4 wire
Wye 2,3 & 4 Wire
AC Current
Amount3 Phase
CT Type5A Secondary
Accuracy2% Full Scale
Switched Output
Number10
TypeHigh Side Switches
Max Current Per Channel1A
Logical Level Drive CapableYes
Other Features
Real-Time ClockYes, 5 year backups
Protected 5V Supply OutputYes, 0.4A
Custom BrandingYes
WarrantyFive-year warranty

 

Downloads

DynaGen Pro600 Downloads
• DynaGen Pro600 Datasheet
• DynaGen Pro600 User Manual
• DynaGen Pro600 Test Specifications
• DynaGen Pro600 J1939 Reference Manual
• DynaGen Pro600 Wiring Schematic
• DynaGen Pro600 Firmware V1.24.07
• DynaGen Rapidcore Configuration Software V2.32.0.14

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

SKU: TG600 Category: Tags: , ,

Customers also bought