Emergency Standby Generator 
 
80 kW Diesel Generator - Perkins (NO DEF REQUIRED)
 
 
Powerful Turbo Diesel Generator powered by a Perkins 4.4L Engine. No DEF fluid is required as this is a lower emission tier engine intended for emergency standby that can run full-time 24/7 just like any other if needed. 
 
The engine is matched to a robust brushless and maintenance-free alternator from Mecc Alte or Linz Electric (optional) and is mounted with vibration isolators to a steel frame. This generator includes a DynaGen control panel that provides complete instrumentation, control, and auto-start.   
 
 
GENERAL SPECIFICATION
 
• NEW Perkins 4.41 L Turbodiesel engine
• Standby Power 80 kW | 100 KVA 
• Prime Power 70 kW | 87.5 kVA
• Output Options 120/240 Volt | 120/208 Volt |  277/480 Volt | 380/600 Volt
• Built on a steel skid frame
• Muffler
• Main circuit breaker
• Battery & cables
• Oil drain valve 

 
ENGINE
 
• Perkins Turbo Diesel 1104D-E44TAG1
• 90.8 kWm (122 hp) net standby power @ 1800 rpm
• 82 kWm (110 hp) net prime power @ 1800 rpm
• 4.4 L | 4 Cylinder 
• Coolant Level & Temperature Sensor
• Oil Pressure Sensor
• Service intervals are 500 hours standard

ALTERNATOR
 
• Meccalte Industrial Alternator
• Model ECP32
• Brushless / Maintenace Free
• Automatic Voltage Regulator
• UL/CSA Approved
 
INSTRUMENTATION & CONTROL
 
DynaGen controllers make using your generator easy. Place it to Automatic or manually turn your generator on and off with the push of one button. The display provides easy to read generator instrumentation. An event log keeps track of operation and can be set to alert you when it is time to change the oil.
 
The DynaGen "tough" series controllers are intended to operate even in harsh conditions, without fail. A simple two-wire start makes them compatible with any standard transfer switch or remote starting system.
 
Displays:
• Oil Pressure
• Engine Temperature
• Fuel Level
• Oil Level
• Hour Meter
• RPM
• Real time clock with time/date
• Battery Voltage
• J1939 DTC codes with custom text
• DPF and DEF status icons
• Two customer defined parameters
• (temperature, pressure, voltage, levels)
• 3-Phase AC Volts & Hz (for generators)
 
Features and Functions:
 
• Controller is user reconfigurable using front panel buttons or free software 
• SAE J1939 CAN Bus Protocol
• Auto start on Low Battery and other sensors
• Trim feature for sensors and AC voltage inputs
• Maintenance counter
• Exerciser Clock
• 150 Event Log
• Conformally coated for protection against moisture and contaminants
• Gasket for water ingress protection
• Passcode protected
• Automatic shutdowns and warnings
• Manual and remote start
• Momentary start/stop inputs
• Pre-heat and many configurable timers
• Accepts common senders (VDO, Datcon, Murphy, and more)
• Custom senders configurable with PC software
• Installed RelayPak is socketed and uses industry standard cube relays.
• 5-Year Warranty
 
OPTIONAL

•  Block & Oil Pan Heater
•  Battery Charger
•  Mains Breaker